Salus

T30NC230 is a thermal actuator for energy saving, used to regulate surface heating and cooling systems. Characteristics:- First Open function for e...

Electrical devices can be enabled or disabled using the RM-16A relay module. Due to its compact size,it can be mounted in a flush-mounting box, or ...

The inconspicuous wall sensor mounts easily by pushing through a 12mm hole and secured with a peel-off insulating adhesive ring. The only visible p...

It allows mounting SR600, RS600 or RE600 products on a wall or ceiling. The handle also works as a housing.

The SQ610RF Quantum is a ZigBee temperature controller for wireless control of iT600 series devices, such as the KL08RF wiring centre, mini TRV hea...

The CB500 control box is the main element of the underfloor heating / cooling control system. It has a built-in module that controls the heat and c...

The THB23030 / THB2430 is an actuator that can be used for Applications including: Underfloor Heating circuits. The THB23030 / THB2430 has two temp...

The KL08RF wireless wiring centre is a part of the iT600RF system. In combination with the wireless thermostats from iT600RF series, KL08RF provide...

The SR600 relay is installed directly into a junction box or can be wall mounted using the optional SRS600 Surface mount bracket to create a hardwi...

The TRV10RFM is a battery-powered, mini-size thermostatic radiator valve (TRV) controller using ZigBee wireless communication. Simply replace the e...

The PS600 temperature sensor measures and reports the measured temperature periodically. The measured temperatures can be used in a variety of ways...

The SQ610 Quantum is a ZigBee temperature controller for wireless control of iT600 series devices, such as the KL08RF wiring centre, mini TRV head,...

The CB500X extension module control box is an element of the underfloor heating / cooling control system. The control box allows you to control 5 d...

The new SALUS RE600 repeater is the latest addition to the SALUS Smart Home range of products.The RE600 Repeater is a hardwired signal booster that...

The Smart Button is used to trigger the One touch and My Status rules that you have created for your SALUS Smart Home system. Normally One touch an...

The Universal Gateway is the key product for the SALUS Smart Home.This will offer you the possibility to wirelessly control all the connected equip...

The RX10RF can be configured as remote boiler switch or a simple single channel output to control, a thermal actuator or zone valve. Please note th...

The new SALUS WLS600 Water Leak Sensor is designed to detect the presence of water. This can be done using the main sensor directly or via the remo...

The new window sensor is a small, slim, wireless piece of equipment that detects when a window is open or closed and reports this to the SALUS iT60...

The SD600 is a smart photoelectric smoke sensor, with ultra-low-power Zigbee wireless network technology.Once smoke has been detected the red LED f...

The new Salus MS600 Motion Sensor lets you know when movement is detected in a certain area and can trigger different actions in response to that m...

The SALUS 13Amp smart plug is inserted directly into an existing power outlet. It gives Smartphone control of the device plugged into the smart plu...